CHOPO Wire Size Info
Size:
20F
You will most likely be on this page after a recommendation from MTT, you can find lots of information on this page and it is important you read over before purchasing your muzzle. It explains the size, how it could fit, shows dog charts, comparison charts, where to purchase and more. Be sure to scroll to the bottom.
Size/Name Information
Before continuing on we highly suggest you have read over the relevant info on Muzzle Options or What Muzzles Will Fit, Especially if any sizing information is confusing to you.
These are the sizes each seller uses:
MTT: None
Leerburg: Size 20F
FDT: Size 20
D&T: Size 20
Europe Stores: None
The 21 and 20F are two of four sizes that aren't available from CHOPO, we can't work out where they get these sizes from so they are labelled CHOPO but are a FDT (or Leerburg F sizes) size only.
How It Could Fit
Length: This size works best with noses between 2.5” and 3.25”. Depending on your dog's length, you may need to modify your muzzles noseband. A smaller/bigger measurement will also work in some situations.
Width: This size usually works best with widths between 2.5” and 3.25”. This measurement is a bit more relaxed but wider is better than narrower. Most muzzles will need some amount of squishing over the nose, which is why width is more relaxed.
Muzzle Height: The 20F has a front height of 4.75”. We always size to a full pant or height accurate to a full pant. If measured correctly, this should fit well. Depending on use, sometimes it can be slightly over the measurement where full pant isn’t needed. It’s also fine to be slightly under the height too.
Other measurements: If your dog is on the shorter end of length, the chin length may end up being long, which usually needs different modifications. The only way to tell if this will be an ‘issue’ is to try the muzzle out, most of the time it still works good.
• If your dog is in between sizes we will likely give you two or more options. Please see the other links (if there’s any) for information on size.
Dog Charts
Comparisons
Where & How To Purchase
Purchase Option 1/2
LEERBURG ‘POLYMER WIRE’ (US)
They are a US based company but do ship internationally (though not recommended due to high postage cost).
Do NOT follow their sizing or measurements. They are incorrect and incomplete.
Purchase Option 2/2
FDT ‘M9/M10’ (WORLDWIDE)
Fordogtrainers aren't the best place to purchase from, though following below will help greatly in everything going well.
While their international shipping is okay, the cost is a little pricey and shipping is slower. Do NOT follow their sizing or measurements. They are incorrect and incomplete.
What to do for best outcome:
Pick the model (M9/M10) and location you want
Pick the size given on rec (1-30) *drop down may say ‘I will fill my dogs measurements’, click that to select size.*
Do NOT give them any information like measurements, breed, size or age. They WILL size wrong and possibly refuse to refund.
Use PayPal, using this ensures you have back up if they try to refuse a refund/exchange. They may also help with the return shipping fee.
Once purchased it’s likely they will email/call you for your information, reply to ‘send the size you ordered’. They will send it.
Not following the above puts you at high risk of getting the wrong size and not being able to return it.
M9= NORMAL WIRE, M10= RUBBERISED
USA
CANADA
UK
AUS
NZ
ASIA